Description

The RAVFR creates a link between volt-free relay, switch or PIR sensor outputs and Rako RF based receivers.
The unit accepts 7 contact closures for scenes 1-4, off, raise and lower.
When connected to a PIR sensor, the unit can be configured to enable and disable the PIR using an RCP RF wall plate or TCM timeclock module

RELAY CONTROL

The RAVFR volt-free contact interface allows scene control from ordinary push switches, relays and PIR movement sensors.
In factory default setting, the unit will select scenes 1-4, off and master raise & lower.
When configured with the RASOFT programming software, it is possible to enable and disable switch inputs, select toggle mode and set PIR delay times

Mechanical Data

Technical Data

Dimensions	160x50x36mm
Input Supply	12V DC regulated (RAPSU or equiv.)
Weight	125g
Housing	UL V0 material
Climate Range	Temperature +2C to +40C Humidity +5% to 95% non condensing
Connections	2 way screw terminal for power supply 8 way screw terminal for volt-free contact closure inputs
Terminal Sizes	2.5mm2 for power supply 1.0mm2 for contact closure inputs
Standards	Emissions - EN61000-6-3 : 2001 Immunity - EN61000-6-1 : 2001 LVD - EN 60950-1 :1992
Communication	Rakom coded fm radio, 433.9MHz
Memory	Flash memory (non volatile)