Description

A compact 4 channel 30W per channel, constant voltage LED dimmer with in-built RF receiver and Rako processor for control of 4 channel constant voltage LED fittings.
When used with RGBW fittings each colour is allocated a channel and can be individually adjusted allowing complete colour mixing. Simple colour cycling is started/stopped using the raise/lower buttons in a Rako wallpanel or hand held remote.
Controlled from any Rako Rakom device, e.g. RCP/RCM wall plates or Bridge interface units.

Technical Data

Dimensions	172x46x40mm
Input Supply	12 or 24v DC
Weight	142g
Battery Life	UL V0 ABS
Climate Range	Temperature +2C to +40C Humidity +5% to 95% non condensin
Connections	2 way screw terminals for 12-24v d.c. supply. 6 way screw terminals for load
Protection	Reverse polarity input protection. Output current limit protection.
Load Types	4 channel constant voltage LED fittings and tapelight.
Minimum Load	1w
Maximum Load	500VA refer to Rako when dimming GU10 style LEDs 12v DC 4 channel @120w 24v DC 3 channel @180w 24v DC 4 channel @240w
Terminal Sizes	4mm2
Standards	Emissions - EN61000-6-3 : 2001 Immunity - EN61000-6-1 : 2001
Communication	Rakom coded fm radio, 433.9MHz
Memory	Flash memory (non volatile)