Description

Designed to fit through a ceiling cut-out of 50mm diameter or greater the RLED45CC1 is fed from a suitable DC power supply to provide an adequate forward voltage. The RAPSU48 is recommended. The module is connected in-line before the first fitting and can control up to 13 LEDs in series (note: some fittings may use multiple LEDs, if in doubt refer to Rako's technical department) with a maximum wattage of 45W.
Programmed using either an RCM RF wallplate or the RASOFT software suite, the unit stores the house, room and channel address plus 16 preset scene levels in non volatile memory. The RLED45CC1 dimmer can be controlled from any Rako transmitter such as RCM wallplates, RAH hand helds and Bridge modules and forms the foundation of any Rako scene-set system.
For more information on dimming LEDs refer to Rako's application sheet ‘Controlling LED Lighting With Rako Dimmers and Modules'.

Technical Data

Dimensions	172x46x40mm
Input Supply	48V DC max
Weight	177g
Housing	UL V0 ABS
Climate Range	Temperature +2C to +40C Humidity +5% to 95% non condensing
Connections	4 way screw terminals for supply 2 way screw terminals for load connections.
Load Types	Constant Current LED Fittings
Minimum Load	1w
Maximum Load	45w
Terminal Sizes	4mm²
Standards	Emissions - EN61000-6-3 : 2007 Immunity - EN61000-6-1 : 2007
Communication	Rakom coded fm radio, 433.9MHz
Memory	Flash memory (non volatile)