Description

The RNC070 push button control module is programmable via Rako's patented NFC (Near Field Communication) technology allowing each of the buttons to trigger a single or multiple commands. Each input is fully customisable, can be addressed to separate Rako Rooms or Channels and activate on press, or release which gives a 'Press and Hold' function.
Additionally each input can trigger an internal macro function. This product can only be programmed with a laptop using Rako’s Rasoft Pro software and the Rako RAMPI programming interface.
The wall plate controllers are designed to be mounted anywhere, be it flush mounting to UK back-boxes or simply surface mounted to any flat surface using the pattress provided**. It is also suitable for all switch accessory plates that use a 50x50mm grid and cover plate arrangement.
Surface mounting is only suitable for screwfixing flat plates and NOT screwless plate options.

Technical Data

Dimensions	50x50x12mm - flush mount 92x92x14mm - surface mount
Fixing	Flush mounting into standard UK single gang back box, minimum 12mm deep. Surface mounting on standard single gang UK or European back box or direct to flat surface.
Input Supply	6V DC - 2x 3V Lithium coin cell CR2016 (remote power supply version available)
Weight	100g
Battery Life	Greater than 3 years
Climate Range	Temperature +2C to +40C Humidity +5% to 95% non condensing
Standards	Emissions - EN61000-6-3 : 2007 Immunity - EN61000-6-1 : 2007
Communication	Rakom coded fm radio, 433.9MHz
Memory	Flash memory (non volatile)